Specifications |
A-600(Mid-sized 6-Zone) |
General |
Outside Dimension(L*W*H) |
3600x720x1250mm |
Standard Color |
Computer Grey |
Weight |
Approx. 420KG |
Number Of Heating Zones |
Up6/Bottom6 |
Length Of Heating Zones |
2300mm |
Exhaust Volume |
10M3/minx2 Exhausts |
Standard Feature Of Control System |
Electric Supply Required |
3phase, 380V 50/60Hz |
Power For Warm Up |
11KW |
Power Consumption |
4KW |
Warming Time |
Approx. 20 minute |
Temp. Setting Range |
Room Temp. --- 300 degree |
Temperature Control Method |
PID Close Loop Control + SSR Driving |
Temperature Control Precision |
± 1.0 degree |
Temperature Deviation on PCB |
± 1.5 degree (by MR Board Test Standard) |
Heating Element |
Especial Heating elements For Long Life ; |
Commutated Element |
Aluminium Alloy Plate |
Max. Temp. Gap Between Preheat & Reflow Setting |
80 degree |
Max. Temp. Gap Between Preheat Zones Setting |
40 degree |
Max. Temp. Gap Between Reflow Zones Setting |
50 degree |
Abnormal Alarm |
Abnormal Temperature (Extra-high / Extra-low Temp. ) |
Board Dropped Alarm |
Tower Light: Yellow- Warming; Green-Normal; Red-Abnormal |
Features Of Conveyor System |
Rail Number |
0 Lane (With Rail is Option) |
Max. Width Of PCB |
290mm (Option: 410mm ) |
Components Clearance |
Top/ Bottom Clearance of PCB is 20mm |
Converyor Direction |
L→ R (Option: R→ L) |
Fixed Rail Side(With Rail) |
Front Rail Fixed(Option: Rear Rail Fixed) |
Transmission Agent(With Rail) |
Air-Reflow = Chain + Mesh , N2-Reflow=Chain(Mesh is option) |
Converyor Height |
900+/-20mm |
Converyor Speed Range |
300~2000mm/min |
Temp. Thermocouple Slot |
Standard |
On Line Editing |
Standard |
Cooling Method |
Forced-Air (Standard) |